Can you develop a product if we only have requirements, not a drawing?

Yes. Describe the application, the target load, the closed length and the installation conditions. We assess which existing series can be adapted, or whether a new configuration is required, and confirm the scope before sample development begins.

Can we review a sample before mass production?

Sample development and evaluation are part of the normal process. Sample cost and lead time depend on the product, the tooling status, material availability and the scope of customization; both are confirmed after the technical review.

Which test reports and certifications are available?

Our drawer slides are type-tested to EN 15338, with SGS test reports covering durability and loading capacity. Which report applies depends on the series - we send the relevant documents together with your quotation.

OEM / ODM

Custom Drawer Slides OEM & ODM Manufacturing

Q: What is the difference between OEM and ODM?

OEM means you supply the specification - a drawing, a sample or an approved design - and we manufacture to it. ODM means you supply the application and the target requirements, and we take part in defining the product configuration, reviewing feasibility and developing the sample with you.

Q: What is the minimum order quantity?

It depends on the series and on whether new tooling is involved - an order to an existing configuration is different from a new custom configuration. We confirm the applicable quantity with your quotation instead of quoting one figure for every case.

Q: Can we use our own brand, packaging and barcode?

Yes - private-label packaging is available for approved OEM projects. Packaging, labels, barcodes and export carton specifications are discussed against your brand requirements and your destination market.

Send a drawing, sample or target spec - we build it in our own Shunde factory, from tooling to packed carton.

Custom dimensions, lengths and extension configurations
Load requirements, locking functions and other selected features
Materials, surface finishes and mounting patterns
Private-label packaging and product identification

Submit Your Drawing Chat with Our Sales Team

Assembly line at the Xingyao plant in Shunde — Our own production line - the line your order runs on.

Our OEM / ODM Process

From initial technical review to approved production, each stage is coordinated around your product requirements.

01

Requirement review

Send a drawing, sample or target spec - we check dimensions, load, function, material and finish, and confirm what is manufacturable before quoting.
02

Quotation in writing

Specification, tolerances and price are documented on the quotation, so sample and production are judged against the same criteria.
03

Samples

Samples are built to the agreed spec, measured against it and submitted to you for approval before tooling is committed.
04

In-house production

Tooling, stamping, plating, assembly and QC run under one roof in Shunde to the approved configuration.
05

Inspection & shipment

Sampling inspection to the agreed plan, your labels and carton specs, then documents for your destination port.

Steel coil raw material stored at the Xingyao factory — Steel coil raw material

Stamping and press shop at the Xingyao factory — Stamping & press shop

Finished drawer slides packed and stored for export — Finished goods & export packing

Customization Options

Dimensions & Extension

Discuss closed length, extension type, mounting configuration and hole pattern based on your drawing or application requirements.

Load & Functions

Specify your required load rating and functional requirements. Available options depend on the slide series, dimensions and validated product configuration.

Materials & Surface Finishes

Discuss cold-rolled steel, selected stainless-steel options and available surface finishes. Material and finish availability is confirmed for each product configuration.

Private-Label Packaging

Packaging can be discussed according to your brand identity, labelling requirements, barcode information and export carton specifications.

Where Does Your Project Start?

Almost every OEM / ODM enquiry begins from one of three starting points. Find the one that matches what you already have - we take it from there.

1You have a drawing

Send the drawing, tolerances and load - we confirm what is manufacturable and quote from that.

Typical specification ranges

2You have a sample

We measure it, mark the critical dimensions and match it to a series we can build.

3You have requirements only

Tell us the application, load and installation - we propose the configuration.

How to choose a series

Not sure which applies? Send whatever you have - a photo, a sketch or the application details is usually enough to start the technical review.

What to Include in Your RFQ

To help us evaluate your project, please share as much of the following information as available:

Slide type or section height
Closed length
Target load
Locking or soft-close function
Mounting arrangement
Material and finish
Order quantity and market

Do not have a drawing? A physical sample, product photos or application details can also help us understand your requirements. Send it through the RFQ form or by WhatsApp.

Frequently Asked Questions

The questions buyers ask most often before an OEM / ODM project starts.

What is the difference between OEM and ODM?

OEM: you provide the drawing or approved design and we manufacture to it. ODM: you describe the application and target load, and we propose the configuration and sample plan.

We have requirements but no drawing - can you still build it?

Yes. Send the application, target load, closed length and mounting conditions; we assess which series can be adapted and what tooling is needed.

What is the minimum order quantity?

MOQ is quoted per configuration. Existing series ship in mixed-model orders; a new custom configuration carries its own MOQ.

Can we approve a sample before mass production?

Yes. Samples are built and measured to the agreed spec, then sent for your engineering validation before production starts.

Can we use our own brand, packaging and barcode?

Yes. Private-label packaging, labels, barcodes and export cartons are agreed before production and applied to your order.

Which test reports can you provide?

Our H53 and H76 heavy-duty series are type-tested by SGS to EN 15338 clause 6.3 - both reports are published on the quality page.

Still have a question? Ask it in the RFQ form - technical questions are answered by the engineering team, not by a call centre.

Tooling, Samples & Production Planning

Tooling requirements are reviewed during the quotation stage. Any new tooling, tooling modification or related charges are discussed separately where applicable.

Sample lead time depends on the product, tooling status, material availability and customization scope. The expected schedule is confirmed after the technical review.

Mass production starts after the agreed specifications and sample approval requirements have been confirmed.

Quality Control

Quality inspection is carried out according to the applicable inspection plan, including sampling or batch inspection as required.

Inspection items and acceptance criteria should be agreed for each product or project. Available inspection records and supporting test documentation can be discussed with your sales contact.

Shipment & Export Requirements

Packaging, shipping arrangements and export documentation are coordinated according to the order requirements and agreed trade terms.

Available Incoterms, payment arrangements, shipping destinations and documentation requirements are confirmed during quotation and order review.

Ready to Discuss Your OEM Project?

Send your drawing, sample details or target specifications. Our team will review your requirements and discuss manufacturing feasibility, sample development, tooling and quotation.